Does anyone here have advice for tape that is very easy to remove from poly perimeter base? I am looking for a 1 or 2 ,(3 day max) hold so I can easily change tape, sometimes without washing the unit. I have been using no residue tape and don't care for it much. Mainly because it is too much work to get it off the perimeter and it needs remover. Then the unit has to be washed. By the time a week is up the tape is all gooey, but it is still really hard to get off the perimeter. I have to be very careful, the tape is so hard to get off the unit, it can tear.

The best tape to use directly on poly is Red Liner tape. All of the others break down, get gummy and are almost impossible to remove.

Edited: 07/21/2010 at 06:53 PM by exstudent

I have no problems lasting a week now. I think the problem was shaving with a razor vs electric razor. My head is less oily after shaving with electric razor. I use 4 tapes. back, front , and sides .

Hi if you have the PU edge all tapes will be difficult to clean, for that reason i changed to all lace systems, takes less than half the time and less detectable to the touch